To Make End Decorative Traverse Rods

Sep 3rd

Decorative traverse rods are a way to accentuate your windows with curtains. Traverse rods allow you to open and close the curtains with a pull wire. Sometimes one or more of the rings pauses requiring replacement. Unfortunately rings replacement requires removal of the decorative traverse rods of the window. Taking a polygonal decorative rod allows you to separate and remove the defective rod rings. Unlike standard bar, scroll bar is adjusted within a clip channel in the top of the mounting brackets.

Vintage Decorative Traverse Rods
Vintage Decorative Traverse Rods

Unhook the curtains of the main carrier scroll bar. Curtains hung on metal hooks up out of holes in the scroll bar. Hold one end of the scroll bar with one hand and turn the decorative cap counterclockwise with your free hand. Remove end caps at both ends this way. Locate the screw on the retaining clips that secure the bar to the mounting clips. There is a mounting clip on each end and one in the center. Remove the screws with a Phillips screwdriver. Hold the center of the bar and lift up and out of the brackets. Pull the decorative traverse rods from the wall. That a explanation about to make end decorative traverse rods. May this post can help your problem.

12 Photos Gallery of: To Make End Decorative Traverse Rods

Image of: Vintage Decorative Traverse Rods
Image of: Modern Decorative Traverse Rods
Image of: Decorative Traverse Rods
Image of: Decorative Traverse Rods with Rings
Image of: Decorative Traverse Rods with Pull Cord
Image of: Decorative Traverse Rods with Drapes
Image of: Decorative Traverse Rods with Cords
Image of: Decorative Traverse Rods Picture
Image of: Decorative Traverse Rods Ideas
Image of: Decorative Traverse Rods for Sliding Glass Doors
Image of: Decorative Traverse Rods for Patio Doors
Image of: Decorative Traverse Rods Curtain